SBS SI Brake Pads - Model No 783SI - Husqvarna CR65 / KTM SX65

SI Sinter

Free Shipping Australia Wide!

Time to grab yourself a bargain!

Description

SI (Sinter) is the perfect pad for the woods, desert or your next enduro adventure. SI is less aggressive than the RSI compound, but offer great feel and long pad life. Ideal for GNCC, National Enduro or Hare & Hound racing.

Model Number

783SI

Fitment - ALL FRONT

HUSQVARNA
CR 65 12- 13 RSI
KTM
SX 65 02- 03 RSI
SX 65 04- 08 RSI
SX 65 09- RSI RSI
SX 85 04- 10 RSI RSI
SX 85 11 RSI

Need to find the correct pad for your make / model / year bike?

1. Click here to view the SBS Application guide and scroll down to find your bike and pad number (normally 3 digits)
2. Then either search for the 3 digit part number in the search bar at the top of this page, or scroll through the listings in our store to see if we have your model pads.

Note: Make sure you remember to order 2 X sets for twin disk front end if you have one. 

Please note: You will need to order 1 set per caliper for Twin Disk front end. If you have twin rotors you will need to order 2 X sets of pads.

Please note: we only have limited stock and it is all listed on this site.

Please note: Product photos may not represent the exact shape of the pad listed - please check the technical drawing above for exact pad shape.

Bedding-in: this is a particularly important procedure for all compounds. The pads are bedded in by applying the brakes lightly several times and ending with a firm bite, leaving a pause between one squeeze and the next. This will produce the correct heating and cooling cycle needed to prepare the system. The duration of the bedding-in period depends on the type of compound: generally longer for organic compounds than for sintered.