SBS LS Brake Pads - Model No 736LS - Honda NT / VFR / CBR / VT / NRX / VTX

LS Sinter

Free Shipping Australia Wide!

Time to grab yourself a bargain!

Description

LS is a sinter metal compound especially formulated for the rear brake. To minimize the chance of a rear wheel lockup situation, LS features a lower friction level than SBS front brake compounds. LS is very resistant to heat and does not fade under extreme use. LS is manufactured using the latest technology in sintering processes and exceed OEM specifications. As with all SBS compounds meant for street use, LS meets TUV, ABE and ECE standards.

Model Number

736LS

Fitment - REAR ONLY

HONDA
NT 650 V Deauville 02- 05 LS
NT 700 Deauville ABS 06- 12 LS
NT 700 V Varadero,
ABS 10- LS
VFR 800 FI Interceptor,
ABS 02- 05 LS
VFR 800 Interceptor 98- 01 LS
VFR 800 Interceptor 06- 13 LS
VFR 800 Interceptor
ABS 06- 13 LS
CB 1100 X-11 00- 03 LS
CBR 1100 XX Super
Blackbird 96- LS
VT 1300 Fury ABS 10- 12 LS
NRX 1800 Valkyrie Rune 04- LS
VTX 1800 01- LS

Need to find the correct pad for your make / model / year bike?

1. Click here to view the SBS Application guide and scroll down to find your bike and pad number (normally 3 digits)
2. Then either search for the 3 digit part number in the search bar at the top of this page, or scroll through the listings in our store to see if we have your model pads.

Note: Make sure you remember to order 2 X sets for twin disk front end if you have one. 

Please note: You will need to order 1 set per caliper for Twin Disk front end. If you have twin rotors you will need to order 2 X sets of pads.

Please note: we only have limited stock and it is all listed on this site.

Please note: Product photos may not represent the exact shape of the pad listed - please check the technical drawing above for exact pad shape.

Bedding-in: this is a particularly important procedure for all compounds. The pads are bedded in by applying the brakes lightly several times and ending with a firm bite, leaving a pause between one squeeze and the next. This will produce the correct heating and cooling cycle needed to prepare the system. The duration of the bedding-in period depends on the type of compound: generally longer for organic compounds than for sintered.