MonkeyBones 50mm Clipon handlebar set
Our MonkeyBones Clipon Handlebars (made from T6061 Aircraft Aluminium) are a more reliable, more adjustable and cost-effective way of managing the steering of your race or street bike. Standard handlebar mounts have the inserts (bars) pressed in so that in the event of a crash the whole handlebar assembly must be replaced. The advantage of running clipons is that the inserts can be swapped out for new ones in seconds. Plus the level of bar length and angle can be adjusted, unlike a factory handlebar that is set at fixed length and angle. These kinds of adjustments can help with arm pump and general fatigue.
MonkeyBones Clipon Handlebars are CNC machined from top quality Billet Aluminium in order to provide you with the strength and reliability that our MonkeyBones gear is renowned for.
We sell 50mm and 53mm Clipons - click here to see fork sizing Application Guide
Our handlebar inserts are also sold separately and are a must for every racer's spares kit. They come in black and silver and include delron bar ends that are a component required for scrutineering. Please see our store to purchase.
MonkeyBones Clipon sets and bars are available in black and silver, please see our store to purchase
- Insert bars are 22mm X 265mm (290mm with delrin ends) and will fit Woodcraft, Valter Moto and most clipon clamps
- Mid mount bar with 16 degrees drop
- T6061 Aircraft Aluminium
- Delron bar ends (scrutineer pass)
- Spare bars available
Please Note: 50mm billet clipon assembly will fit most late model 600/750/1000's with the exception of Ducati which run a 53mm fork leg. If you are not sure if they will fit please measure your fork leg width before ordering as returns for non-fitment will not receive a refund for postage.
MonkeyBones Clipon assembly is a "mid mount" type with 16 degrees of drop. Meaning that the handlebar protrudes from the middle of the clipon assembly and drops toward the ground at 16 degrees. Honda CBR1000's and 600's have a high bar mount as standard so our MonkeyBones Clipons will cause the controls to touch on the upper fairing because they are lower than the standard bars. We suggest for street models CBR customers do not use MonkeyBones clipons. If you are running a race bike and are keen to have a lower bar setup then some modifications of the upper fairing can be made to provide clearance for the lower bars as well as running Steering Bump Stops that are available from our store.
Be The First To Review This Product!
Help other motospares users shop smarter by writing reviews for products you have purchased.